These displays are small, only about 1.3″ diameter, but very readable due to the high contrast of an OLED display. This display is made of 128×64 individual white OLED pixels, each one is turned on or off by the controller chip.
This breakout can be used with either an SPI or I2C interface – selectable by soldering two jumpers on the back. It works with 3V Microcontrollers. It includes the I2C connector for using it with DACBerry Series boards, if you want to connect to them, do not forget to add the needed I2C 4 Pin cable.
– SSD1306/SH1106 Driver
– 128×64 pixels
– White monochrome
– SPI and I2C (Default)
– Selectable I2C Address (Default 0x7A)
– 5V and 3V3 Compatible
– 4x M2.5 Screw Holes
We only use original parts and from top brands on our products. Stay away from products using fake parts and help us to win the battle against counterfeit semiconductors products.
|Dimensions||35 x 29.5 x 6 mm|
*NOTE: Check Documentation tab for drawings, guides and more.