Description

The DACBerry ONE+ for Zero is an improved version of the DACBerry ONE Professional Audio Soundcard with a beautiful gold plated and matte black finish. It’s plugs directly on the Raspberry Pi Zero and Zero W. Compatible with Asus Tinker board and other ones using the same GPIO.

This is high resolution soundcard for the Raspberry Pi, with analog output and digital I/O. Simply stack the plug-and-play add on board (HAT) onto your Raspberry Pi or other compatible board and it will be ready to use immediately!

No soldering is required, it’s simple to install and use. All the mounting hardware already provided this product, suitable from beginners to professionals. Just connect your DACBerry ONE+ to your desired powered speakers or to an audio amplifier and you can be up and running quickly, enjoying flawless high quality audio playback within minutes of unboxing this soundcard. You can also add an optional IR receiver to allow remote control operation of your Raspberry Pi DAC.

Integrates a 384kHz/32 bit DAC chip with hardware volume mixing and an S/PDIF Transceiver to play/record your files digitally. Outputs are line level over RCA and headphone over 3.5mm jack cable. The DACBerry ONE+ uses the I²S interface for its audio input which reduces CPU load on the Raspberry Pi compared to USB solutions. It is also powered directly from the GPIO header so no extra cables or power supplies are needed.

There are a number of exciting projects and applications where the standard on-board audio on the Raspberry Pi simply won’t make it. Use it for streaming your favorite songs from your phone, create a multi-room audo player or media center, play your desired spotify playlist or enjoy watching youtube videos with a high definition audio, and many many more.

Specifications

Analog / Digital soundcard
THD+N 0.003% / -92dB @1kHz
PCM5142 + WM8804 in Software Mode
Configurable onboard modes for WM8804
Up to 384kHz / 32bit resolution
Up to 0.2W on 32 Ohm Headphones
Dual ultra low-jitter and low-phase noise oscillators
Dual ultra low-noise LDO’s for analog and digital power rails
Directly powered from the Raspberry Pi / Tinker Board / Jetson Nano
IR Sensor capable for remote control
Gold-plated RCA and 3.5mm phone jack
Optical (TOSLINK) and Coaxial (RCA) connectors
Optical and Coaxial Input/Output
SDB™ 1.0 (rev. A1) / 1.1 (Rev. A2) Connector
Onboard I²C connector (Qwiic compatible) for peripherals
Low-Noise design with isolated Digital and Analog parts
Compatible with all Raspberry Pi’s with the 40-pin connector
Compatible with Asus Tinker Board and othes (Odroid, Banana Pi, XMOS interfaces..) using I²S protocol via SDB™ port
Compatible with OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others
Designed and assembled in Barcelona, Spain